Fluxbox - 如何配置双显示器?

我有一个nVidia 9800显卡,我之前通过nVidia X服务器设置设置我的屏幕。 然而,当我从Gnome切换到Fluxbox时,它显示我的2个显示器被处理为一个单独的屏幕。

我如何配置我的显示器以确保我可以在它们之间鼠标并且还有不同的历史照片等?

更新: 这是我现有的xorg.conf文件:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  ([email protected])  Fri Apr  9 11:51:21 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VH236H"
    HorizSync       30.0 - 85.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9800 GTX+"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +1920+0, DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  ([email protected])  Fri Apr  9 11:51:21 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VH236H"
    HorizSync       30.0 - 85.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9800 GTX+"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +1920+0, DFP-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
0
2019-05-18 21:11:06
资源 分享
答案: 3

格兰德吉特)有关?

进入软件中心,然后查找“ grandr”,安装并尝试。 在Ubuntu 16.04 npls上不再可用。

此外,您还有阿兰德 另一个XRandR GUI 以及小苹果(无关)。

0
2019-12-01 20:17:01
资源

您使用什么VGA? 如果Nvidia,nvidia有自己的视频剪辑安排,名为nvidia-settings

截图

0
2019-05-21 03:21:44
资源

您可以做的一点是断开一个显示器,重新激活您的计算机系统,然后重新检测显示屏幕。 需要得到它(这是我过去需要执行的,至少)。

0
2019-05-21 01:56:47
资源