Tips and also methods for recognizing the resisting drive

I have a raid 1 that has actually fallen short partly. The controller informs me the raid is weakened, yet does not inform me which drive is falling short.

When I search in My Computer, I see that the controller divided my raid 1 2 the different drives, so currently I have 2 of the very same dividings. I can read information from both them simply penalty. The SMART standing is being foolish and also claims no mistakes.

One drive is making a clicking audio, yet I can not inform which one. Can I intensify the audio some just how to situate it?

What are some tricks/tips I can do to identify which drive is falling short without taking the computer system down and also exchanging drives? I am attempting to decrease down time.

0
2019-12-02 03:13:36
Source Share
Answers: 7

Looking in the occasion log, you need to have an occasion from the disk resource :

Log: System
Source: disk
Event ID: 7
Message: The device, \Device\Harddisk4\DR3, has a bad block.

And after that to recognize DR3, you locate Disk 3 in Disk Management :

0
2019-12-04 06:25:41
Source

HDTune is a wonderful device. You can run a mistake check and also locate the over all wellness of your disks. Most likely to www.hdtune.com and also download and install the free variation.

0
2019-12-04 06:18:39
Source

If you can access the drives, and also the clicking audio is fairly normal you can position your hand on top of the drive and also usually really feel when the click takes place in one drive or the various other.

0
2019-12-03 05:14:11
Source

If you can literally touch the drives, you should have the ability to establish which one is clicking, given that the click is (I think?) brought on by the electric motor relocating the head throughout of the plate repetitively.

0
2019-12-03 05:14:06
Source

Disk Management (diskmgmt.msc) might offer a sign.

0
2019-12-03 05:13:56
Source

Poor male is stethoscope : Long' ish screwdriver. Pointer on the drive, take care of on your ear. Pay attention per drive. If either clicks you need to have the ability to promptly separate it.

(Works wonderful with shutoff - covers on your old autos when paying attention for shutoff sound also ; -))

Of training course, this thinks clearance and also sound judgment concerning where on the drive you touch ...

0
2019-12-03 05:13:14
Source

An old back - timbers mechanic method can can be found in convenient for this example. I as soon as saw an old technician old a lengthy straight stick hard versus the hand of his hand and afterwards push his knuckle up versus his ear. He positioned the various other end of the stick on components of the engine and also can listen to which cyndrical tube was not shooting appropriately. Timber performs audio well if it has no void air void to leap. If your old adequate you could bear in mind in flicks a cowboy placing his ear to the train track to inform if a train is coming or the Indian paying attention to the ground to listen to the buffalo. The very same concept uses below. As insane as this appears you can utilize it to locate the clicking audio, offer it a shot.

0
2019-12-03 05:11:19
Source