Is there a command in Cisco IOS to show all courses marked with a details tag?

In Cisco IOS, if I have a course - map access as adheres to:

route-map redistribute deny 10
 match tag 65000 100

Is there a 'show' command that will offer me a checklist of all courses that will match that verse?

EDIT: To those thinking of making use of 'show ip course' and also 'inc', the recap kind of show ip course does not include tag details:

Router>show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is x.x.x.x to network

B [20/2948] via, 1d19h
B [20/0] via, 1d19h
B [20/0] via, 1d19h

It is just presented when you give a prefix as an argument:>show ip route
Routing entry for
  Known via "bgp 6447", distance 20, metric 2948
  Tag 3549, type external
  Last update from 1d19h ago
  Routing Descriptor Blocks:
  *, from, 1d19h ago
      Route metric is 2948, traffic share count is 1
      AS Hops 2
      **Route tag 3549**

So one 'show ip course' command does not allow you get details concerning all courses marked with a details tag.

2019-05-13 03:24:44
Source Share
Answers: 3

I have not totally attempted this, yet it strikes me that you can create a dummy course procedure with a course - map that rearranges suits right into it.

something like :

router ospf 99

rearrange bgp 6447 subnets course - map tagtest


course - map tagtest allow 10

suit tag 3549


This after that need to show you every one of the marked courses :

router # sh ip ospf 99 data source

2019-12-02 00:01:27

I'm thinking OSPF below, yet I beleive it becomes part of the show ip ospf data source commands. I assume the tag in the adhering to commands coincides one you are referrign to with you are course - map.

Router# show ip ospf summary-address
OSPF Process 2, Summary-address Metric -1, Type 0, Tag 0 Metric -1, Type 0, Tag 10
2019-05-21 07:05:06

Link to Cisco IOS IP Command Reference additionally see Table 62 very same web page

The following is example result from the show course - map command:

Router # show course - map

course - map abc, authorization, series 10

Match conditions:

tag 1 2

Set conditions:

metric 5

course - map xyz, authorization, series 20

Match conditions:

tag 3 4

Set conditions:

metric 6
2019-05-17 11:46:12